The Plastics Distributor and Fabricator - Your Industry Magazine
The Plastics Distributor and Fabricator, Your Industry Magazine
Plastic Spacer
News Features Series Articles Columns
Plastic Spacer
Return Home
Article Keyword Search
Leister to Host DVS Training and Certification Classes
Purdue to Establish LSAM Laboratory
AAG Brands Celebrate 30 Years
 




LATE BREAKING NEWS  

Purdue to Establish LSAM Laboratory
Purdue University’s Composites Manufacturing Simulation Center (CMSC) and Thermwood Corporation have agreed to establish a large-scale additive manufacturing laboratory to perform industryfunded research into large scale composite thermoplastic additive manufacturing.

The new facility will be located in Purdue’s Indiana Manufacturing Institute located in the Purdue Research Park in West Lafayette, Indiana and will be staffed and operated by Purdue CMSC personnel. The official name for the new facility is the “Thermwood LSAM Research Laboratory at Purdue University”.

The new laboratory will be equipped with an LSAM 105 (ten-five) Large Scale Additive Printer and a corresponding 5-axis LSAM Additive Trimmer plus a variety of support systems. This installation is capable of printing and trimming complex geometries up to 5’ x 10’x 4’ tall at print rates of up to 100 lbs. per hour. Commercial maximum print temperature for LSAM printers is usually limited to 450 C, however, this particular system has been modified to allow testing at even higher temperatures for experimentation with innovations in materials normally not used in additive manufacturing.

“Not only will this effort improve the overall quality of large-scale additive printing but it should also increase our knowledge and understanding of the basic process of fusing layers together into a homogeneous structure” says Ken Susnjara, Founder, Chairman and CEO of Thermwood.

“Extrusion deposition composites additive manufacturing is a major innovation that will contribute to the development of tailored products with unique performance and just in time availability.” Added Dr. R. Byron Pipes, Executive Director of Purdue’s Composite Manufacturing & Simulation Center, the research organization where the LSAM system will be installed.

Purdue plans to partner with industry to provide services to enhance, encourage and expand the adoption of large-scale additive manufacturing for diverse industrial applications. They also plan to work with polymer suppliers to refine formulations and determine the ideal processing parameters necessary to produce the absolute highest quality large scale printed parts possible.

For more information, contact Duane Marrett, Thermwood Corporation, 904 Buffaloville Rd., Dale, IN 47523, 800-533-6901, E-mail: duane.marrett@thermwood.com, Web: www.thermwood.com.

Return Home | Back To Top
Plastic Spacer

 
Copyright © 2024
Plastics Distributor® & Fabricator Magazine
P.O. Box 669
LaGrange, Illinois 60525-0669
All Rights Reserved.
Header Image courtesy of Nylatech, Inc.

Phone: (708) 588-1845
Fax: (708) 588-1846
Email Us