CNC Router for Trimming Thermoformed Parts

CMS North America, Inc.’s new THESIS machining center is designed to meet the needs of thermoformers and plastic fabricators. All THESIS machining centers have an 177” x 59” cast iron table with supports that have threaded holes for securing fixtures, a removable central shield for pendular machining and the following axes strokes and quick positioning speeds: X=165.35” / 3,150” per minute, Y=59.05” / 3,150” per minute, Z=31.49” / 1,450” per minute, B=+/- 160° / 12,000° per minute and C=450° / 12,000° per minute.

THESIS machining centers have a heat-treated, stress-relieved, monoblock base that reduces vibration. The standard perimeter safety cabin is designed for operator safety and noise reduction during machining. Three different 5-axis working units are available: a TU - 1.2 hp single exit electrospindle, air-cooled, maximum speed: 40,000 rpm; a R3 - three 1.0 hp single exit electrospindles in a revolver placed 120º apart, air-cooled, maximum speed: 24,000 rpm; or a TUCU - 4.8 hp single exit electrospindle with automatic toolchanging ability and six-place toolchanging rack, air-cooled, maximum speed: 24,000 rpm.

For more information, contact Steve Hillis, CMS North America, Inc., 4095 Karona Court, Caledonia, MI 49316, 800-225-5267 / 616-698-9970, Fax: 616- 698-9730, E-mail: cmssales@cmsna.com, Web: www.cmsna.com or www.cms.it.