The Plastics Distributor and Fabricator - Your Industry Magazine
The Plastics Distributor and Fabricator, Your Industry Magazine
Plastic Spacer
News Features Series Articles Columns
Plastic Spacer
Return Home
Article Keyword Search
 
ARTICLES
Category: General Fabricating
Volume: 33
Issue: 1
Article No.: 5299

BROWSE ARTICLES
BY CATEGORY: < Previous | Next >
BY ISSUE: < Previous | Next >
Back To Article Directory - Jan/Feb-12


Router Increases Plex-Appeal's Speed & Quality

Since buying a MultiCam¨ 3000 Series Router, Plex-Appeal Inc. of Irving, Texas, has broadened its custom acrylic fabrication abilities. Part owner Terry Bodeker started the business in 1997 and bought his router in 2005 to do high-quality specialty work. ItÕs run nine hours a day ever since and has allowed him to cut more shapes faster.

ÒWith our MultiCam Router, we can produce unlimited designs,Ó Bodeker said. ÒIt replaced a little pin router and is always booked. Parts come off the machine in one setup and one pass. The best thing I ever did was buy a MultiCam. ItÕs very easy to use and does the work of four people.Ó

Creating slotted panels was virtually impossible until Bodeker bought his router. The versatile CNC platform has brought in a wider variety of work.

ÒNow we can cut slots, ovals, circles, curves and Ts,Ó Bodeker said. ÒOur MultiCam Router cuts a half moon in just one step when it used to take multiple passes. The machine paid for itself by eliminating a lot of handmade templates. ItÕs made a huge difference by saving time and improving our quality.Ó

Bodeker had never used CAD software before, but he picked up the user-friendly EnRoute programming software immediately. He appreciates how easily it edits the tool path. Cutting an acrylic circle used to take half an hour from start to finish. Now he can create a program, fixture the acrylic blank and cut it on his router in under 10 minutes. This dramatic decrease in job time has more than tripled Plex-Appeal’s productivity.

ÒOur MultiCam Router is a great machine,Ó Bodeker stated. ÒThe price was fair, everything we needed was included, and MultiCam Tech Support is very good about calling back to coach us. This machine has a lot of stamina in heat. ItÕs taken a beating in summer, but it keeps on rocking.Ó

Plex-Appeal uses the router for every application. ItÕs cut 10,000 pieces to make museum cases with polished edges. The router has been the ideal machine to make everything from kidsÕ shoe panel displays for JC Penney to knife cases for LoveÕs Travel Stops and Country Stores. Plex-Appeal also routes holes in raw materials for construction sites.

ÓWith our MultiCam Router, we can take any piece of plastic and turn it into anything a customer can imagine,Ó Bodeker said.

For more information on Plex-Appeal, Inc., contact Terry Bodeker at 866-528-9024, Fax: 972-554-0527, info@plexappeal.com, Web: www.plex-appeal.com. For more information on MultiCam, contact John Harris at 972-929-4070, Fax: 972-929-4071, E-mail: jharris@multicam.com, Web: www.multicam.com.

Return Home | Back To Top
Plastic Spacer

 
Copyright © 2024
Plastics Distributor® & Fabricator Magazine
P.O. Box 669
LaGrange, Illinois 60525-0669
All Rights Reserved.
Header Image courtesy of Nylatech, Inc.

Phone: (708) 588-1845
Fax: (708) 588-1846
Email Us